1. Check to make sure your Amazon Hub is compatible (Click here for more information)

• Alexa app version: 2.2.491118.0 or later
• Matter-supported Echo devices:

Device	Version
Echo/Echo Dot	5th Gen: Echo Dot, Echo Dot (Gen 5 with Clock) 4th Gen: Echo, Echo Dot, Echo Dot (Gen 4 with Clock) 3rd Gen: Echo, Echo Dot, Echo Dot (Gen 3 with Clock)
Echo Show	3rd Gen: Echo Show 10, Echo Show 15 2nd Gen: Echo Show 8, Echo Show 5 1st Gen: Echo Show, Echo Show 8

 

Note: A firmware update may be needed for Matter support

 

2. Follow these steps to set up the Matter-enabled device

• Restore your device to factory default settings.
• Launch the Alexa app and go to the Devices page.

 

• Tap + and then tap Add Device to add a new device.

 

 

• Choose Other, tap Matter, and then tap Next on the following pages.

 

• Tap Yes on the confirmation page.

 

• Tap Scan QR Code and scan the QR code on your Matter device.

 

Alternatively, you can tap Try Numeric Code Instead? to enter the numeric setup code that

comes along with your device.

 

 

• When prompted choose the Wi-Fi network you want your device to connect to and enter the corresponding Wi-Fi password.

 

• Tap Done to complete the setup. You should now be able to find your device on the Device list and use your voice to control your device,

 

Notes:

• The pairing mode of your Matter-certified device will automatically turn off after 15 minutes.
• If the setup is not complete in this 15-minute period the Matter-enabled device will need to be power cycled
• Alexa will create the name according to the device type.

 

3. How to integrate your device into another ecosystem

 

For Matter a QR/setup code can only be used once. To add your product to another controller you will need to open the app of the first ecosystem, in this case Alexa, to generate a new setup code.

 

*The following steps use Google as an example

• Launch your Alexa and go to the device Settings page.

• Tap Other Assistants and Apps and then tap Add Another to create an 11-digit setup code.

c. Copy the setup code.

• Launch the Google Home app and follow the setup instructions to enter the setup code and follow the app instructions to complete the setup. Once complete you will now be able to control your smart device from both Alexa and Google.

 

 

 

 

1. Check to make sure your Google Home hub is compatible (Click here for more information.)

• Google Home App: 2.62.1.15 or later
• Matter-supported Controller:

Device Type	Device Name
Wi-Fi Routers	Nest Wi-Fi Pro (Wi-Fi 6E)
Speakers	Google Home, Google Home Mini, Nest Mini, Nest Audio
Displays	Nest Hub (1st gen), Nest Hub (2nd gen), Nest Hub Max

Note: A firmware update may be needed for Matter support

 

2. Follow these steps to set up the Matter-enabled device

 

• Restore your device to factory default settings.
• Launch the Google Home App, then tap +.
• Choose Set up Device and tap New Device to add a new device.

 

• Tap Matter then tap Next.

 

• Tap Yes.

 

• Scan the setup QR code on your device.

 

*You can also use the numeric code by tapping Set up without QR code and entering the numeric code.

 

 

• Tap Done when the device is connected.

 

• Choose a location for your device then give it a name.
• You will be able to find your device on the Device list and control it in the Google Home app or with Google assistant devices

 

Notes:

• The pairing mode of your Matter-certified device will automatically turn off after 15 minutes.
• If the setup is not complete in this 15-minute period the Matter-enabled device will need to be power cycled

 

3. How to integrate your device into another ecosystem

 

For Matter a QR/setup code can only be used once. To add your product to another controller you will need to open the app of the first ecosystem, in this case, Google Home, to generate a new setup code.

 

• Launch your Google Home app and go to the device settings page.

 

 

• Tap Linked Matter apps & services then tap Link apps & services.

 

• Create a new paring code:

(1) Choose Using pairing code.

(2) Copy the pairing code.

 

• Launch the Apple Home app and follow the setup instruction to enter the pairing code.

Note: The pairing code will expire in 3 minutes.

 

• Follow the setup instructions to complete the process. Now you can turn on/off your device from both Apple and Google.

 

 

 

1. Check compatibility (Click here for more information)

• iOS system: Version 16.2 or later.
• Matter-supported Controller: Home Pod, Home Pod mini, or Apple TV.

Note: Please update your iOS devices to iOS 16.2 or later.

 

2. How to set up your matter device

• Plug in your device.
• Launch the Apple Home App. Then tap +, followed by Add or Scan Accessory to add a new device.

 

 

• Scan the setup QR code on your device.

 

 

• Choose a location for your device and give it a name.

 

 

• Choose how your device will appear. You should now see your device in the Device list and be able to control the device in the Apple Home app.

 

 

Notes:

• The pairing mode of your Matter-certified device will automatically turn off after 15 minutes.
• If the setup is not complete in this 15-minute period the Matter-enabled device will need to be power cycled

 

3. How to integrate your device into another ecosystem

 

For Matter a QR/setup code can only be used once. To add your product to another controller you will need to open the app of the first ecosystem, in this case, Alexa, to generate a new setup code.

 

• Launch the Apple Home app and go to the Device Settings page.

 

 

• Tap Turn On Pairing Mode and then Copy Code.

 

• Launch the Google Home app and follow the setup instructions to enter the setup code and complete the setup. Now you control your Matter device from both Apple and Google.

 

Note: You will need to wait for 5 minutes to create a new code. Please copy the code or take a screenshot to keep the code. Alternatively, you can restart your device to generate a new code immediately.

 

 

• Connect your mobile phone to the same Wi-Fi network as your Matter device.
• Open the Tapo app and the device will be automatically found.

 

• Tap ADD DEVICE to add your device.

• Follow the app to complete your setup process. (screenshots provided for example)

Note: If no window pops up on your Tapo app or you accidentally choose Not Now on the above pop-up window, you can manually add your device to Tapo.

 

• Connect your mobile phone to the same Wi-Fi network as your device.
• Launch the Tapo app and tap + on the home page
• Choose the device you want to add from Discovered Devices.

• Follow the app to complete your setup process.