How to connect your Robot Vacuum to your home Wi-Fi

Tapo RV10, Tapo RV10 Lite, Tapo RV10 Plus, Tapo RV20, Tapo RV20 Max, Tapo RV20 Max Plus, Tapo RV20 Mop, Tapo RV20 Mop Plus, Tapo RV20 Plus, Tapo RV30, Tapo RV30 Max, Tapo RV30 Max Plus, Tapo RV30 Plus, Tapo RV30C, Tapo RV30C Mop, Tapo RV30C Plus, Tapo RVA100, Tapo RVA101, Tapo RVA102, Tapo RVA103, Tapo RVA200, Tapo RVA300, Tapo RVA400

11-03-2022 61,557

Before You Start

Make sure your phone/tablet is connected to your home Wi-Fi network.
Only 2.4 GHz Wi-Fi is supported.
Make sure you have turned on Bluetooth.
A Wi-Fi password is needed during setup.

1. Open the Tapo app and tap Vacuums on the menu bar. Tap the + icon and select your model.

2. Turn on your robot vacuum.

For RV30 Max/RV20 Max Series:

Press and hold the power button for 3 seconds to turn it on. You will hear either "Turning On" or a beep, indicating a successful power-on. Tap Next.

For RV10/20/30 Series:

Slide the power switch from OFF to ON to power your robot vacuum. You will hear either "Turning On" or a beep, indicating a successful power-on. Tap Next.

3. Press and hold the and buttons simultaneously for 5 seconds and then release. All buttons should start to blink white. Tap Next.

Note: If buttons are not blinking white, press and hold the and buttons simultaneously for 10 seconds to reset your robot vacuum.

4. Connect your phone to your robot vacuum.

5. Select your home Wi-Fi and enter the Wi-Fi password.

Note: Only 2.4 GHz Wi-Fi is supported.

6. Success! Your robot vacuum is now connected to your Wi-Fi.