How to fill the water tank for the Robot Vacuum

Tapo RV10, Tapo RV10 Plus, Tapo RV20 Max, Tapo RV20 Max Plus, Tapo RV20 Mop, Tapo RV20 Mop Plus, Tapo RV20 Plus, Tapo RV30, Tapo RV30 Max, Tapo RV30 Max Plus, Tapo RV30 Plus, Tapo RV30C Mop, Tapo RVA102, Tapo RVA103

01-16-2023 24,157

Before You Start

• Fill with cool/room temperature water only. Be careful not to wet the metal contacts.

• Use only cleaning agents specified by Tapo. Others may corrode the water tank.

RV10/RV20 Mop

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV10 Plus/RV20 Mop Plus

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV30

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV30 Plus

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV30 Max Plus/RV30 Max/RV20 Max Plus/RV20 Max

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

Note: To prevent corrosion, do NOT add any cleaning agents. Only use cool or room temperature water and be careful not to wet the metal contacts.

3. Wipe the water tank with a clean, dry cloth.

4. Re-install the dustbin and water tank.