FAQs
What Should I do if the Main Brush on My Robot Vacuum is Stuck?
Tapo RV10, Tapo RV10 Plus, Tapo RV20, Tapo RV30 Plus
04-12-2023
16,637
The main brush of your Tapo Robot Vacuum is the primary cleaning apparatus of the device.
If the main brush gets stuck, please try the following troubleshooting steps:
- Please turn the Robot Vacuum over and inspect for large debris, entanglements, or large objects in the main brush.
- If any of these objects are present, please remove the main brush and clean it using the steps below:
-
- Turn the Robot Vacuum over, then unlatch and remove the main brush cover.
-
- Remove the brush and its end cap.
-
- Remove any stuck objects using the cleaning brush.
3. Clean the connection points between the main brush and the Robot Vacuum.
4. Re-install the cap and main brush, pressing firmly on the main brush cover to lock it in place.
If the issue persists, please Contact Support.